Range Rover Evoque BCM Replacement

Pelican Diagnostics UK provides a specialist Range Rover Evoque BCM Replacement and programming service for faulty Body Control Modules fitted to Evoque L538.

We supply, clone and program compatible replacement BCM modules using the original immobiliser, VIN, key and vehicle configuration data from your original module.

This service is commonly used to repair vehicles suffering from BCM communication failures, immobiliser faults, water damage and electrical system malfunctions.

• Service Type: Evoque BCM Replacement & Programming
• Models Covered: Range Rover Evoque L538
• Turnaround: 1–3 working days
• Requirement: Original BCM required for cloning/programming
• Result: Plug-and-play replacement BCM in most successful cloning cases

How to Order

1. Remove the original faulty BCM from the vehicle.
2. Check and photograph the BCM part number label.
3. Include your VIN number, fault description and return address.
4. Package the BCM securely.
5. Send your module to:

Pelican Diagnostics
Padley Farm, Drove Lane
Sleaford
NG34 8JQ

Once received, we transfer the immobiliser, key and vehicle configuration data into a compatible replacement BCM and return it ready to install.

Compatible Evoque Models

• Range Rover Evoque L538 (2011–2018)

The Evoque BCM controls critical vehicle systems including immobiliser, central locking, lighting, CAN communications and security functions. :contentReference[oaicite:1]{index=1}

Common BCM Part Numbers Covered

L538 Evoque BCM Part Numbers

• BJ32-14F041-AC
• BJ32-14F041-AD
• BJ32-14F041-AE
• BJ32-14F041-AG
• EJ32-14F041-AB
• EJ32-14F041-AC
• EJ32-14F041-AD
• GJ32-14F041-AB
• GJ32-14F041-AC
• GJ32-14F041-AD

Additional compatible part numbers may also be supported. Contact us with clear BCM label photos before ordering if unsure. :contentReference[oaicite:2]{index=2}

Common BCM Fault Symptoms

• No crank or no start
• Smart key not detected
• Central locking faults
• Lighting system problems
• No communication with BCM
• Random electrical faults
• Immobiliser active
• Water-damaged BCM
• CAN communication faults
• Battery drain issues

Our Evoque BCM Services

1. BCM Cloning

We transfer the immobiliser, VIN, key and coding data from the original BCM into a compatible donor module.

2. BCM Replacement

We can supply and prepare tested replacement BCM modules for many Evoque models.

3. Virgin BCM Supply

We can also supply virginised (factory reset) BCM units which will require coding to the vehicle using dealer-level diagnostic equipment.

Important Information

Your original BCM is required for data transfer and verification.

The original BCM should ideally still communicate diagnostically for successful cloning. If the original module is severely damaged or completely non-communicating, additional recovery work may be required.

This service is intended for confirmed BCM hardware faults only. Smart key or software-related faults may require additional diagnosis. :contentReference[oaicite:3]{index=3}